Printer Status

The status messages shown on the printer cards are based on the printer state.

Important: When there is no data transfer from a printer, the printer card is inactive and shows the connection status instead of the printer status. For more information on the connection status, click

, the information icon.

Status Messages and Printer States

Status Message / Printer States
	Checking Idle Not ready Pre/post not ready Ready Sleeping Starting Started Start-up Stopping Shutting Down Shutdown Warming
	Feeding Initializing Preparing Printing Processing Receiving
	Adjusting Calibrating Cleaning Disconnected Maintenance Not available Pre/post busy Pre/post threading Pre/post EOF Pre/post paused Rebooting Recirculation Restarting Restart Error, when the error that occurred on the printer is not critical.
	Error, when the error that occurred on the printer is critical.
	Any other printer state.

Note:

For more information on printer states, see the printer documentation.
For printers with duplex or triplex configuration, the Printing and Idle status messages are displayed only when all the printer engines are in a printing or idle state. When at least one of the engines is in an error state, the Error status message is displayed. If only one of the engines is in an error state, the engine number is included in the Error status message.
For printers with dual-simplex configuration, a separate printer card is displayed for each engine and the status is tracked per engine.
When several error codes are received from the printer at the same time, only the main error is displayed on the printer card.
RICOH Predictive Insight orders the errors from a set of simultaneous errors based on this default order:
1. inputTrayEmpty
2. mediaEmpty
3. markerSupplyEmpty
4. outputBinFull
5. markerWasteFull
6. paperJam
7. mediaLow
8. coverOpen
9. serviceRequested
10. offline
11. unknown
For example, if the inputTrayEmpty, serviceRequested, and offline error codes are received at the same time, inputTrayEmpty is the main error that is displayed on the printer card.

If the mediaEmpty and paperJam error codes are received at the same time, mediaEmpty is the main error that is displayed on the printer card.

Any other errors that are received from the printer but are not included in the default list take precedence over the errors in the list.

RICOH Predictive Insight

Printer Status

Status Messages and Printer States